Network administrators should perform security assessments of hardware that they will provide their users, or particularly paranoid users might want to poke at their devices just to be extra sure.
In this blog post, we will demonstrate the techniques used to assess security on a generic portable router purchased online. We have redacted its identifiable information as our goal here isn’t to provide a free penetration test to the hardware manufacturer. (Someone enterprising enough could still figure this out.)
Can we actually trust this device? This was an inexpensive router, and probably assembled with off-the-shelf components.
In order to assess how secure this device really is, we are going to have to take it apart and figure out what makes it tick.
The router came in a small box covered in helpful information about its capabilities, with the only brand attribution being a silver sticker with [REDACTED] written on it.
It looks like a device made by a third party and re-branded to quickly bolster the product offerings of another company. A quick Google search did not yield a website for this product on the first page of results, but more digging did reveal a manufacturer that we will not disclose here.
Perusing their product line, we were able to find the router we had purchased. We located a firmware update and downloaded it for further investigation. More on this later.
Once we received the router, the first thing we did was disassemble it. The best tool to do this is the ifixit tool kit.
This is the gold standard for disassembling stuff. It comes with many of the esoteric fastener heads devised to frustrate anyone trying to take things apart.
This mini router had no visible screws—this is a trend for many devices as of late. Disassembly required the use of the “spudge tool” from the ifixit toolkit, and we gently pried the cover off. Thankfully, there weren’t any of the warranty “void if tampered” stickers. These are illegal.
Taking the router apart revealed the main router board with two antennae and one chip in the center. The main chip in the center was an MIPS processor, and there’s a specific model number silk screened onto the mainboard.
End Date: Saturday May-4-2019 7:57:16 PDT
Buy It Now for only: $5.49
Buy It Now | Add to watch list
End Date: Saturday May-4-2019 7:57:16 PDT
Buy It Now for only: $1.49
Buy It Now | Add to watch list
Some light Googling revealed that this chipset has a manufacturer website and even a product-specific page.
I also found a WikiDevi page on our exact model. WikiDevi is a user-editable database for computer hardware based on MediaWiki and Semantic MediaWiki. This page contains a ton of good info on the chipset, its capabilities, where it is sold, and by who.
Let’s file those tidbits of information away for now. We’ll come back to them later.
The board has four unpopulated pin holes. These are typically called either “plated-through holes” or “annular rings.” We will just refer to them as plated-through holes for this exercise.
This looks suspiciously like an interface that the manufacturer left on the mainboard. These plated-through holes are usually used to flash the operating system onto the board and test the unit at the factory to verify everything is working properly. There’s no attempt made to hide its purpose.
After some light digging on the product website, we did find mention of the slow I/O features of this chipset.
Further, Googling showed that this pinout is fairly common and might be of the UART variety.
There’s mention of UART on the [REDACTED] product page. This looks promising, like a good place to start. But the plated-through holes are in an awkward position, and examining the mainboard is difficult.
In order to get a better look, we did some online shopping. We purchased a “third hand” to hold the mainboard. This portable router is bolted straight to a transformer for the sake of compactness. This means we are in the proximity of 120 Volts, so we should exercise a modicum of caution.
This device is compact and tightly integrated. The chips on the mainboard are pretty small, and our eyesight isn’t what it used to be. Back to the Internet to get a jeweler’s lamp.
So now we had the magnifying lamp, and it is much better than the little one that comes with the third hand. The LED lights also made examining the main board much easier.
To interact with these pins, we could solder wires in, but we’re planning on using this device, provided it passes muster. This meant we were going to try and be as delicate with our probing as we could. Back to the Internet. After some searching, we found breakaway headers.
Snapping four off the length make for a perfect pinout adapter. No solder needed, plus easy access for eventually connecting the USB header and for probing the pins.
Now we needed to investigate what those diagnostic pins were. Did they have voltage? Were they used to send and receive information? Back to the Internet again for more shopping.
Not wanting to buy something too cheap or inappropriate for the task, we Googled affordable voltmeter and found a review for decent and affordable voltmeters. We settled on the Extech EX330 Autoranging Mini Multi-Meter with Built-In Thermometer and Type K Remote Probe.
We also purchased the additional probe connectors kit for good measure. We started with checking for voltage. The bottom half of the router is the transformer. It typically steps down from 120 Volts to 12 Volts. We set the voltmeter to 200 Volts, just to be safe, and got to probing.
The bottom plated-through hole had a square about it. Maybe it was special? So we started by applying the ground to it and power to the top pin, and the result was -3.3 Volts. Quickly inverting the probes gave us +3.3 Volts.
Some quick Googling told us that there are two common voltages used in these types of interfaces: 3.3 Volts and 5 Volts. It looks like our router is of the 3.3 Volts variety, the top pin is ground, and the bottom square pin is positive with 3.3 Volts.
So now we knew what the top and bottom pins were. This left the two center pins as a mystery.
Many other much more talented people than us have gone down this particular rabbit hole, and in this, Google was invaluable. We found pictures of other UART interfaces on other routers.
It does not appear that there’s a standardized pin order, but in most of the examples we found online, gnd (ground) and VCC are at the outer edges.
In our case, VCC would stand for “Voltage Common Collector.” More Googling indicated that there is a cable available to interface with these pins and, most importantly, that you don’t need to connect the 3.3 Volt pin unless you want to watch your cable, your router, and potentially your computer go “poof-the-magic-dragon.”
Good to know. Let’s also store this tidbit of information for later.
So back to more shopping. We found a USB to RS232 TTL UART PL2303HX Converter USB to COM Cable Adapter Module.
We also found some that specified that they came with both voltage selections and, just to be thorough, we also ordered one of these. It wasn’t available with Prime, so we’re still waiting for this to arrive from the slow boat from China.
Back to the investigation
Not being one to assume anything, we also researched what the color coding was for the cable, as it came in a little bubble wrap with no instructions and sadly nothing in the packaging to indicate whether it was of the 3.3 Volts or 5 Volts variety. Similar USB to UART cables had documentation on the web. We made an assumption and theorized that the cable coloring would be the same as the Google picture results (fingers crossed).
Colors matched: black for ground, red for power, green for receive, white for transmit. So far, so good. We plugged in the UART to USB cable in our test machine and encountered another roadblock.
While it was properly detected and Windows did install the correct drivers, it didn’t work. Some investigation revealed the device could not start.
We tried moving the USB device to a different com port in the device manager with no success. We tried downloading the driver directly from the Prolific website and again weren’t met with success. We also tried moving the USB device to a different port (from USB v3 to regular USB). Again, no go.
Digging a little further into the properties of the device revealed that the device cannot start.
Researching this error yielded this forum post. And more specifically, to this entry:
“Windows 8/8.1/10 are NOT supported in PL-2303HXA and PL-2303X EOL (End Of Life) chip versions.”
So while this USB dongle presumably works, it won’t work in Windows 10. What a surprise! Not to be easily defeated, we rebooted into Ubuntu Linux with the USB dongle still attached.
We then proceeded to check if the USB to serial adapter was working. This is achieved by issuing this command:
$ dmesg | grep tty
So now we know that the USB adapter is ttyUSB0. The Windows forum mentioned the pl2303 chipset in the adapter wasn’t supported, and we see it here. In Windows, we would’ve used the Putty terminal program. In Linux, we elected to use GtkTerm. It was installed with this command:
$ sudo apt-get install gtkterm
We found that for best results, invoking GtkTerm from bash needed sudo. (We suspect it needed the user account to be part of a group that has permissions to access the ports.)
$ sudo gtkterm
Once gtkterm was running, we needed to select the proper port. We selected the configuration option and opened the port option.
In the port drop-down menu, at the very bottom, we saw /dev/ttyUSB0. This is the Prolific USB adapter.
We left parity bit, stop bit, and flow control to the defaults and hoped for the best.
After this came the tedious task of determining which of the two pins in the center were transmit and receive, as well as the correct baud rate. Our first attempt was gnd, rx tx and vcc unconnected.
Click here for best antivirus and antispyware software
Powered by WPeMatico